Twitter | Search | |
Search Refresh
PMD Way Oct 15
This mechanical clock tells time using steel balls -
Reply Retweet Like
Renegade Web Design Oct 17
Temperature and humidity display I created. Dolor powered! Just adding the final touches
Reply Retweet Like
ChihauccisoIlConte? 20m
I made a casing for the receiver I’m working on, it’s conceived to be the opposite of a “black box”, even if it’s basically a black box...
Reply Retweet Like
Fraizeraust Oct 18
Thought of making a simple Arduino sketch -- temperature sensor with LEDs. The LEDs turn ON accordingly with a definite set range of the temperature. The code can be found on my personal repository.
Reply Retweet Like
Mike 19h
It’s alive. The ‘Hello World’ of hardware says that my first custom nRF52832 dev board is working. Used a segger to upload the bootloader and verified that the blink sketch was able to upload using the IDE. I’ll post the design files shortly...
Reply Retweet Like
Planet Arduino 18m
This Arduino-powered clock tells time in colors -
Reply Retweet Like
Emlyn Hughes Oct 19
Reply Retweet Like
Kim Jin Oct 19
Nano V3 with FT232RL or CH340G chip compatible sales2@openplatform.cc Open Smart Technology Limited +8615857858321
Reply Retweet Like
Robotics Innovation Institute 15h
Reply Retweet Like
Elektor North America 18h
Elektor now has 15,800+ YouTube subscribers! 16,000 subs …. here we come! Don't miss any of our videos about DIY electronics, electrical engineering, Raspberry Pi, Arduino, etc!
Reply Retweet Like
Daniel Maslowski aka CyReVolt 🐢 Oct 18
"Hey, one of our interns was playing with this thing called and LEDs the other day. How about we put that on one of our boards?"
Reply Retweet Like
Open Electronics 58m
Reply Retweet Like
Eugene 9h
Just soldered another "Bottle opener" but without the GPS and Lora. This is definitely alot better. Peaks during sleep are about 0.4ma but average seems to be around 0.15ma. Now to work on reducing the power consumption with gps and lora.
Reply Retweet Like
Planet Arduino Oct 20
Precision Metal Detector Finds Needles in Haystacks -
Reply Retweet Like
DFRobot 4h
How To Make A DIY RGB VU Meter At Home This interesting project was created by Surajit Majumdar Check it out here:
Reply Retweet Like
Adam Feil Oct 18
Working on a contactless candy dispenser for Halloween
Reply Retweet Like
generationmake 9h
Rev. 0.1 of the NavShieldBNO was just released! It features a Bosch Sensortec BMP388 pressure sensor and a BNO085 orientation sensor and plugs directly onto an MKR board. Interface can be choosen between SPI and I2C for each sensor independant.
Reply Retweet Like
Thiago 8h
Reply Retweet Like
4Hackrr (Eddie Espinal) Oct 19
🎉 ATMegaZero Li-Po Battery Shield is now available on the ATMegaZero Online Store. This shield is compatible with the too. 👌🏻. 👍🏻
Reply Retweet Like
Eugene Oct 19
Playing around with the power consumption of my tracker. Monitored current while in a 2 minute simple sleep cycle. Not a bad start but needs optimization.
Reply Retweet Like

Related searches

@jiberjaber