Twitter | Pretraživanje | |
Andrés Blanco
When doing some Hardware Hacking sometimes you can’t or prefer to avoid soldering stuff to the PCB. Using Hot Glue Gun and the proper angle could do the trick.
Reply Retweet Označi sa "sviđa mi se" More
' or 1=1; drop table tweets;-- K. Reid Wightman 20. sij
Odgovor korisniku/ci @6e726d
Another thing to look at: solderless header. It used to be easier to find but adafruit sells some (2x26 meant for raspberry pi). The insertion ends are bowed slightly to allow contact, and the header can be removed easily with pliers when you’re done.
Reply Retweet Označi sa "sviđa mi se"
Andrés Blanco 20. sij
Odgovor korisniku/ci @ReverseICS
Thanks for the recommendation I will buy them for future projects. This hot glue gun was a work around that worked quite well.
Reply Retweet Označi sa "sviđa mi se"
Andrés Blanco 20. sij
Odgovor korisniku/ci @6e726d
Be careful with small components that could be ripped apart from the PCB when removing the glue. This is really important.
Reply Retweet Označi sa "sviđa mi se"